For the estimation in April and the second quarter, the estimation on March 16 is still valid, but the decrease in April is 10% higher than the neutral prediction. It is a conservative estimation based on 10% for the high probability event. In the second quarter, the output of overseas pig iron will be reduced by 11.67 million tons, affecting the demand for iron ore of about 1.84 million tons; in the first half of the year, the output will be reduced by 18.899 million tons, affecting the demand for iron ore of 32.13 million tons.A588 Gr A structural steel plate
A588 Gr A structural steel plate,"For the team, cooperation is the core idea of daily work, and the core of common cooperation is resource sharing. With a perfect resource sharing mechanism, the whole team can be called a unity spirit.A good team lies in the ability to transfer resources, knowledge and information in time among team members in order to achieve the common goals of the team. So that we can share experiences and lessons."
A588 Gr A structural steel plate,The heat treatment hardness of DC53 mold steel is higher than that of SKD11, , the high temperature is 520-530 ℃, and the high hardness can reach 62-63HRC after tempering. In terms of strength and wear resistance, mold steel DC53 exceeds SKD11 mold steel. The toughness is twice that of SKD11 die steel. The toughness of DC53 is more prominent in cold work die steel. Tools made with DC53 rarely crack and crack, greatly increasing the service life.
LSAW Pipe to Peru. In the beginning of 2014, Peru government released an international tender for one of the hydroelectric power plant. Finally they chose us as the contractor, we purchased the steel plate and then fabricate the steel plate into steel pipe, and then make the corrosion protect on the surface, we also supply the fitting with our steel plate, the total value of this order is about 2 million USD.
For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.
"High strength low alloy steel plate pecifications: A516 Grade 60 plates and sheets are producted with thickness up to 200mm [8 inch].A516 Grade 60/70 Dual Certified HIC NACE TM0284 Plates Hydrogen Induced Cracking;Hot Rolled Steel ASTM A516 Grade 60 Dual Certified HIC Tested Plates in accordance with Nace Test Method, ASTM A516 70 HIC Tested (Hydrogen Induced);Tested Fine Grained Pressure Vessel Steel Plates For Sour Gas Service."A588 Gr A structural steel plate
"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."
A588 Gr A structural steel plate,Company tenet: first class quality and service to create corporate brand.Business philosophy: people-oriented, innovation, continuous improvement, the pursuit of excellence. Quality policy: carry forward the quality spirit, build a perfect quality management system, and put the quality strategy into every detail of the company's daily work.Environmental policy: waste reduction and pollution prevention, continuous improvement, and environmental protection.A588 Gr A structural steel plate
