A514 grade P high strength steel,We are world class steel materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.
A514 grade P high strength steel,Ordinary carbon steel mainly refers to the steel whose mechanical properties depend on the carbon content in the steel, and generally does not add a lot of alloy elements. Ordinary carbon steel is the abbreviation of ordinary carbon structural steel. Carbon content is less than 0.38%, and less than 0.25% is the most commonly used. It belongs to low carbon steel. In the Chinese standard, each metal grade indicates the low yield point of the steel when the thickness is less than 16mm. Compared with high-quality carbon steel, the limitation of carbon content, performance range, phosphorus, sulfur and other residual elements is wider for ordinary carbon steel.
The surface hardness of NM400 wear-resistant steel plate usually reaches 360-450HB, and the steel has a high mechanical strength. Its mechanical properties are three to five times that of ordinary low alloy steel plate. NM400 wear-resistant steel plate has excellent mechanical properties and good wear resistance, and can adapt to various mining conditions under different working conditions. NM400 steel can significantly improve the wear resistance of mechanical components, improve the service life of machinery, and reduce production costs.
Q355GNHE corten steel is characterized by adding a small amount of Cu, P, Cr, Ni and other alloying elements to the steel, so that the steel material forms a dense layer between the rust layer and the substrate with a thickness of about 50 to 100 μm and good adhesion to the substrate metal. The amorphous spinel oxide layer prevents oxygen and water in the atmosphere from penetrating into the steel substrate, slows down the rust development to the steel material, and greatly improves the steel material's resistance to atmospheric corrosion.
A514 grade P high strength steel,16Mo3 alloy are featured by the good heat resistance and corrosion resistance 16Mo3 steel plate chemical composition(%):C: 012 ~ 02 Si: ≤035 Mn: 04 ~ 09 P: ≤0025 S: ≤001 Cu: ≤03 Ni: ≤03 Cr: ≤03 Mo: 025 ~ 035 Al: ≥002 N: ≤0012 16Mo3 alloy steel mechanical properties:Yield strength (MPa) 372MPa, Tensile strength (MPa) 350MPa, Elongation (%) ≥22 Impact temperature (℃) 20, Impact energy value (J) 335J / cm² 16Mo3 steel plate is widely used in petroleum, chemical, power station, boiler and other industries,A514 grade P high strength steel.
There is a silo technology R&D center in our company with many experts. Our technical backbones go abroad to study advanced technologies regularly to make our technology and products leading in the world. We provide our customers with high-quality steel plates, the excellent quality from specialty. With good reputation, high-quality products, strong strength, and low prices, we welcome the clients from the world to come to visit our factory.
First of all, we should establish a correct concept of after-sales service. Service concept is an important part of corporate culture and a long-term enterprise value concept. Our company's after-sales service embodies the concept of "customer first, sincere service for customers". As long as we are in the "sincere service for users" under the guidance of the idea, I believe we will get rich returns.