Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the A514 Gr B quenched and tempered steel project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of A514 Gr B quenched and tempered steel customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.
Compared with carbon steel, low alloy steel has many advantages, such as high strength, good plasticity and toughness, good weldability, good cold and hot pressure processing performance, better corrosion resistance, etc. Due to the increase of A514 Gr B quenched and tempered steel metal composition, the yield point of low alloy steel structure is higher than that of ordinary carbon steel, so it is light and suitable for structural parts application. The low alloy steel is one of our main products.
Titanium microalloying is an element of A514 Gr B quenched and tempered steel strengthening complex with carbon and nitrogen. The addition of micro amount of titanium in the steel can fix almost all nitrogen and part carbon in the steel, so as to eliminate the strain aging phenomenon and improve the aging impact performance of the steel. At the same time, it can refine the grains and change the morphology of the compounds. According to the atomic weight ratio of Ti and N in A514 Gr B quenched and tempered steel tin formula (Ti = 3.4n), the content of Ti in steel should be controlled between 0.015 and 0.025%. Generally, the amount of ferrotitanium added to each ton of steel is 1kg.
1200 tons API 5LGRB strips to Bangladesh. In December of 2015, we get one tender project from National Tubes Limited, which is a famous national enterprise in Bangladesh. It is an order of 1200 tons API 5L Gr. B steel strips, they bought these cargo to fabricate ERW pipe in local place.
