A514 Gr F alloy steel plate leading supplier in China 5.5*2570*8600, 8*2920*7000, 5.5*2490*7100, 5.5*3000*10000, 6*3000*7000, 6*2500*9000, 6*3000*8500, 8*2920*6400, 8*1290*12000, 8.5*2090*8760, 6*2860*8500, 6*2550*11100, 8*2920*6200, 6*3000*13000, 6.5*2200*8700, 6*3000*11000, 6*2690*9000, 8*1800*6400, 5.5*2570*7700, 6*2680*8400, 9*2100*10050, 8*1800*6400, 8*2800*8000, 10*2600*9500.
The difference between alloy steel plate and carbon steel has the following points. First, the hardenability of carbon steel is low, and the maximum diameter of water quenching of carbon steel is only 10 mm to 20 mm; second, the strength of carbon steel is only 235 MPa, while that of alloy steel is more than 360 MPa. Third, carbon steel has poor tempering stability. In order to ensure high strength, low tempering is used for carbon steel during quenching and tempering treatment, so the toughness of the carbon steel is insufficient. Fourth, the corrosion resistance, low heat resistance, and wear resistance of carbon steel cannot be compared with alloy steel, A514 Gr F alloy steel plate.
The company adheres to green development, supported by scientific and technological innovation and technological progress, vigorously advocates the A514 Gr F alloy steel plate production and life style of saving, environmental protection, civilization and low carbon, adheres to the new industrialization road and the sustainable development road. Actively carry out international trade and maintain stable economic and trade relations with more than 80 countries and regions including the United States, Germany, France, the United Kingdom, Japan, South Korea and Australia.
Z-direction steel refers to thick steel with good tensile resistance in thickness direction. In the application of steel plate, the reason for additional performance requirements on the thickness direction of steel is due to the existence of defects in the thickness direction of steel in the process of casting and rolling. This defect makes the steel prone to lamellar tearing during welding, which reduces or even loses the design bearing capacity of application. The Z-direction performance is required for A514 Gr F alloy steel plate and so on steel plate with the tensile force along the plate thickness direction greater than or equal to 40mm.
