S355J2 is a European standard low alloy high strength structural steel grade, equivalent to Q345D. Because of its good impact toughness and welding performance, S355J2 steel plate is widely used in bridges, ships, power plant equipment, hoisting and transportation machinery, machinery manufacturing and other engineering and welding structures that bear high loads. S355J2 steel plate delivery status: hot rolled delivery, the A514 Gr P high strength steel plate specific delivery status should be indicated in the contract.
The effect of nitrogen (N) on the properties of A514 Gr P high strength steel plate and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in A514 Gr P high strength steel plate and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.
X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This A514 Gr P high strength steel plate method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.
A514 Gr P high strength steel plate, High-strength steel plates are widely used in many industries such as construction, automobiles, ships, machinery and equipment, but high-strength steel plates must be selected appropriately. First, the grade is too high, which means that the price will be high because of the high manufacturing cost. Second, the low level means that the safety performance cannot meet the standard. Third, we must strictly follow the design drawings to select high-strength steel plates specifications. Fourth, it is advised the purchaser to test the high-strength steel plates with special equipment.
