Oxygen (O) is a harmful element in steel such as A514 grade P alloy steel plate. Although manganese, silicon, iron and aluminum are added to deoxidize the steel at the end of steelmaking, they can not be removed completely. During the solidification of molten steel, the reaction of oxygen and carbon in the solution will produce carbon monoxide, which can cause bubbles. Oxygen mainly exists in the form of FeO, MnO, SiO2, Al2O3 and other inclusions in the steel, which reduces the strength and plasticity of the steel. Especially, it has serious influence on fatigue strength and impact toughness.
Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the A514 grade P alloy steel plate steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the A514 grade P alloy steel plate steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the A514 grade P alloy steel plate steel sheet on the truck Good luck.
The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should have different quality requirements. In terms of the mechanical properties of steel such as A514 grade P alloy steel plate, yield point, tensile strength, elongation, cold bending property, impact toughness etc. are the indicators to measure the quality of steel. In the design of steel structure, the appropriate steel should be selected according to the characteristics of the structure. The selection of steel is not only an economic problem, but also related to the safety and service life of the structure.
In steel standard JIS G3106, SM570 steel owned the highest yield strength above 460 Mpa, and the tensile strength within 570-720 Mpa. For SM570 steel, the C element content is 0.18%, the Si element content is 0.55% max, the Mn element content is 1.60% max, the P element content is 0.035% max, the S element content is 0.035% max. A514 grade P alloy steel plate, SM570 steel with thickness from 6mm-300mm,width from 1500mm-4000mm,length from 5000-16000mm.
