Our steel pipes include four major types which are seamless pipe, ERW pipe, LSAW pipe, SSAW pipe, A572 Gr 55 CS steel carbon plate. Seamless pipe supply scope is OD 10.3mm--965.2mm, wall thickness 1.0mm--60mm. The ERW pipes production range from OD 21.3mm--660mm, wall thickness 1.0mm--16mm. LSAW pipes can supply with OD 406mm--1524mm, wall thickness 6mm--50mm. SSAW pipes can produce maximum OD 3500mm, minimum OD 219.1mm, wall thickness 3.2--25.4mm.
High strength steel Q345B, GB/T 1591-2008 Q345B steel size and stock (mm):7*2200*6500, 15*1050*8000, 5.5*3000*3600, 15*2200*3650, 32*1800*0000, 7*1600*6000, 28.5*3240*5700, 43.5*1630*3900, 23*2980*3500, 46*750*11300, 6*1460*6000, 10*2500*10000, 40*1770*3350, 26*1830*3500, 26*1800*2800, 11*2890*2880, 26*1300*11000, 43.5*1600*3900, 14*2000*3100, 11*2800*3250, 36*1100*8650, 23.4*2280*2800.
The main raw material of A572 Gr 55 CS steel carbon plate, hot rolling coil is billet. After heating the billet, the strip made from the coarse and fine rolling mill is cooled to a certain temperature by specific cooling, and then the cooled steel strip is made into rolled steel strip by coiler. But generally, according to the buyer's demand, the manufacturer can further process the cooled steel strip into steel plate or flat coil and other products.
Most common A572 Gr 55 CS steel carbon plate steel plates are rolled by hot rolling or controlled rolling. Compared with the general hot rolling process, the advantages of controlled rolling are: the strength and low temperature toughness of steel plates are greatly improved by controlled rolling to refine grains. In addition, the controlled rolling process can give full play to the role of Microalloying Elements Nb, V and Ti, not only play a role of precipitation strengthening, but also refine the grains, and improve the toughness of the rolled A572 Gr 55 CS steel carbon plate steel plates.
