19Mn6 steel is common carbon manganese low alloy steel produced according to DIN17155. 19Mn6 steel has strict control over harmful elements sulfur and phosphorus in chemical composition. The mass fraction of sulfur and phosphorus in the steel A588 Gr B high strength steel is not more than 0.02%. In addition, vacuum degassing technology is used in smelting, which greatly reduces the gas content in the 19Mn6 steel. 19Mn6 steel has good comprehensive mechanical properties, welding properties and technological properties.
In terms of service, our service is a "one-stop" way of working. We have our own A588 Gr B high strength steel processing plant and pretreatment plant, pretreatment of ship steel (shot blasting, derusting, painting). Technical parameters of steel plate and profile steel surface pretreatment production line. We can also let customers enjoy our other pretreatment services, such as A588 Gr B high strength steel cutting, welding, drilling, galvanizing, etc., at the lowest cost.
Normalizing is to heat the steel parts to 30~80℃above the critical temperature for a period of time. Then the parts are taken out of the furnace and cooled in air. Since the cooling rate of normalizing is faster than that of annealing, the strength and hardness of normalized A588 Gr B high strength steel are higher than that of annealed A588 Gr B high strength steel, but the elimination of internal stress is not as good as annealing. The normalizing operation of A588 Gr B high strength steel is simple, the cost is low, the productivity is high, and it is widely used in actual production.
The chromium plays an important role in A588 Gr B high strength steel, Chromium Molybdenum steel. The chromium can form a dense oxide film with strong adhesion on the surface of the steel plate, so as to prevent the internal metal from further oxidation or corrosion. The higher the chromium content in the steel plate, the denser the oxide film, and the better the oxidation resistance and corrosion resistance of the steel plate.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
