The company adopts the ASTM A573 CS steel carbon plate international advanced management system, and has passed the certification of ISO9001 quality management system, ISO14001 environmental management system and GB / T28001-2001 occupational health and safety ASTM A573 CS steel carbon plate management system, and has realized the comprehensive integration of the three systems. In the future development path, the company will adhere to the guidance of scientific development concept, accelerate the implementation of six development strategies, namely, the main business development strategy, cost leading strategy, science and technology innovation strategy, management upgrading strategy, green steel strategy, and Harmonious Co construction strategy, promote the company's sustainable development, and build the company into the most competitive modern steel group.
Common ASTM A573 CS steel carbon plate, steel plate thickness specifications are as follows: Thick steel plate: thickness greater than 4, width within 10 is less than 2000mm, width above 10 is generally 2000, 2500mm, length 4-12m; Thin steel plate: thickness less than 4mm, width 500-1500mm, length 1.5-4m; Flat steel: thickness 4-60mm, width 12-200mm, length 3-9m.
The wear-resistant plate ASTM A573 CS steel carbon plate shows good wear resistance: the chemical composition of the alloy layer contains 4-5% carbon and 25-30% chromium. The volume fraction of Cr7C3 carbide in the metallographic structure is more than 50%, the macro hardness is HRC56-62, and the hardness of chromium carbide is HV1400-1800. Because of the vertical distribution of carbides in the wear direction, the wear resistance of the cast alloy with the same composition and ASTM A573 CS steel carbon plate hardness is more than twice as that of the cast alloy with the same composition and hardness. Compared with several typical materials, the wear resistance is as follows: (1) compared with low carbon steel; 20-25:1 (2) with as cast high chromium cast iron; 1.5-2.5:1.
Expression method of pressure coefficient of seamless steel pipe: pressure P < 7MPa coefficient S-8 7 < ASTM A573 CS steel carbon plate steel pipe pressure P < 17.5, coefficient 5-6 pressure P > 17.5, coefficient S-4 seamless pipe production and manufacturing: tube blank -- Inspection -- peeling -- Inspection -- Heating -- perforation -- pickling -- grinding -- lubrication and air drying -- welding head -- cold drawing -- solution treatment -- pickling -- pickling and passivation -- Inspection -- cold rolling -- degreasing -- air drying -- internal polishing -- one external polishing -- Inspection -- identification of finished ASTM A573 CS steel carbon plate product packaging.
There are a lot of ASTM standards for pressure vessel steel plates. Such as ASTM A204, A285, A302, A387, A515, A516, A517, A537, A612, A841, etc. Those ASTM steel plates have different thickness ranges. ASTM A573 CS steel carbon plate, ASTM A204 plates shall not thicker than 150mm. ASTM A285 plates shall not thicker than 50mm. ASTM A515 plates shall not thicker than 200mm. ASTM A517 plates and A537 plates shall not thicker than 150mm. ASTM A612 plates shall not thicker than 25mm. ASTM A841 plates shall not thicker than 100mm.
The company's after-sales service tenet is "customer first, timely guarantee, enthusiastic service and effective work". In order to establish a set of perfect after-sales service system and strict management system, so that the after-sales service can be effectively guaranteed. The company has set up after-sales service department to ensure timely, unique and effective response to every user's request, coordinate internal resources internally, and put an end to all evasion and delay.
