Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with A588 Gr A high strength steel ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.
ASME SA514 grade M quenched and tempered alloy element composition%C: 0.12-0.21, Si: 0.20-0.35, Mn: 0.45-0.70, P max.: 0.035, S max.: 0.035, Ni: 1.20-1.50, Mo: 0.45-0.6.0, B: 0.001-0.005The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18
2020 October A588 Gr A high strength steel specification: 8*2200*10000, 16*2150*10400, 30*2500*6200, 31.2*2950*9380, 7*2200*8000, 30*2200*10000, 14*2400*9900, 18.5*2700*9570, 21*2100*8810, 14*2070*9060, 12*2200*10000, 14*1950*8000, 36*2200*7700, 7*2200*8000, 14*2070*9060, 10*2200*8000, 20*2500*10000, 14*2400*10000, 30*2000*7400, 6*2800*12000, 21*2100*8810, 32*2200*10000, 16*2150*10250, 27*2500*9000, 20*2100*7000, 21*2100*9100.
Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our A588 Gr A high strength steel products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.
