How to prevent ASTM A573 plate, steel plate cutting cracks? 1. Preheat the steel plate before cutting, and the preheating temperature depends on the quality grade and thickness of the steel plate. However, it needs to be heated evenly. 2. The cutting speed is reduced appropriately, but its reliability is not as good as preheating. It is suggested to preheat the cutting belt with flame gun cavitation several times before cutting, and the preheating temperature should reach about 180℃.
SS400 is a low carbon steel with no specified carbon content. According to its mechanical properties, it is similar to ASTM A573 plate ASTM A36, which is widely used in engineering and industrial applications. The cost of JIS SS400 steel angle steel structure is low, and it has good performance in major projects. SS400 angle steel description:Item: SS400 angle steel. ASTM A573 plate Standard: JIS G3101-2004. Technology: hot rolled. Type: equal & unequal. Surface: black or galvanized. Length: 6 m, 9 m, 12 m or per your request. Equal angle: Size: 20 × 20 mm to 200 × 200 mm. Thickness: 3 to 20 mm. Length: 6 m, 9 m, 12 m or per your request. Unequal angle: Size: 30 × 20 mm to 250 × 90 mm. ASTM A573 plate Thickness: 3 to 10 mm. Length: 6 m, 9 m, 12 m or per your request.
Classification of ASTM A573 plate, steel plate, including strip steel: 1. Classified by thickness: (1) thin plate (2) medium plate (3) thick plate (4) extra thick plate 2. Classification by production method: (1) hot rolled steel plate (2) cold rolled steel plate 3. Classification according to surface characteristics: (1) galvanized sheet (hot galvanized sheet, electro galvanized sheet) (2) tin plate (3) composite steel plate (4) color coated steel plate 4. Classification by use: (1) bridge steel plate (2) boiler steel plate (3) shipbuilding steel plate (4) armored steel plate (5) automobile steel plate (6) roof steel plate (7) structural steel plate (8) electrical steel plate (silicon steel sheet) (9) spring steel plate (10) others
During the construction of hot-dip ASTM A573 plate galvanized pipe, the correct welding process shall be adopted, the inspection and acceptance shall be carried out in strict accordance with the specification, and the anti-corrosion treatment (zinc rich paint) shall be done timely after the welding is completed. It is feasible in the construction process of open and closed air conditioning system, which can improve the ASTM A573 plate construction speed and the firmness of the pipe connection. Therefore, the hot-dip galvanized pipe can be welded and connected under the construction conditions and on the premise of relevant protection and anti-corrosion measures.
