The weldability of ASTM A588 HSLA steel plate is good. It means that under certain process and construction conditions, ASTM A588 HSLA steel plate can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.
The company always adheres to the concept of green production, follows the development path of innovation, transformation and improvement, and has carried out in-depth cooperation with Zhengzhou University and other scientific research institutes, planning from a high starting point, strict standard design, and successfully implementing engineering projects With nearly 20 research and development projects, the company's production technology and equipment are at the forefront of the industry, and indicators such as environmental protection, energy consumption, cost, and resource utilization have reached the advanced level in the industry.
Strip steel is mainly divided into hot-rolled ordinary strip steel, cold-rolled ordinary strip steel, hot-rolled high-quality strip steel and cold-rolled high-quality strip steel. The ASTM A588 HSLA steel plate, hot-rolled carbon strip steel is made of ordinary carbon structural steel, and is hot-rolled into strip steel with a thickness of 1.80-6.00mm and a width of 50-1200mm. The hot-rolled carbon strip steel is mainly used for the manufacture of cold-rolled billets, cold-formed steel billets, welded steel pipe billets, bicycles, and small hardware products.
The steel such as ASTM A588 HSLA steel plate delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.
