Welded pipe, also known as welded steel pipe, refers to the steel pipe made of steel plate or strip steel after crimping and forming, with a fixed length of 6 meters. The production process of welded steel pipe is simple, the production efficiency is high, the varieties and specifications are diversified, and the equipment investment is less, but the general strength is lower than that of seamless steel pipe. A283 grade C mild steel coil, Welded pipes have many uses and are almost ubiquitous in our lives. However, when choosing welded pipes, we must pay attention to performance and material characteristics.
Structural steel is a category of steel construction material that is produced with a particular cross section or shape, and some specified values of strength and chemical composition. A283 grade C mild steel coil, Structural steel plates are normally supplied in the as-rolled condition. Our structural steel plate are supplied with thickness range 3mm to 350mm. The plates may be ordered normalized or stress relieved, or both. steel plates shall be normalized. steel plates and sheets shall be quenched and tempered.
Chemical composition of Q390C steel plate: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.7, P ≤ 0.030, S ≤ 0.030, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.50, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.10, Al ≤ 0.015. The mechanical properties of Q390C steel plate are: yield strength ≥ 390 MPa, tensile strength 470-620 MPa, elongation after fracture ≥ 18%, impact energy 34J. A283 grade C mild steel coil, Q390C steel plate is used for bridges, vehicles, ships, workshops and other large structural parts, high and medium pressure Petrochemical vessels, boiler tubes, pipes, superheaters, pressure vessels, heavy machinery, etc. application.
Advantages of hot rolling: hot rolling can destroy the casting structure of ingot, refine the grain of steel and eliminate the defects of microstructure, so that the steel structure is dense and the mechanical properties are improved. This improvement is mainly reflected in the rolling direction, so that the A283 grade C mild steel coil steel is no longer isotropic to some extent; the bubbles, cracks and looseness formed during pouring can also be welded under the action of high temperature and pressure.
