Converter steelmaking: The furnace body of the converter can be rotated, and the steel plate is used as the outer shell, and the refractory is used as the inner lining. Converter ASTM A572 ms steel coil steelmaking does not require additional heating, because the molten iron is inherently high temperature, and it still continues to generate thermal oxidation reactions (from silicon, carbon and oxygen in molten iron).Because no more fuel is needed for heating, energy consumption is reduced.
2020 October ASTM A572 ms steel coil specification: 8*2200*10000, 16*2150*10400, 30*2500*6200, 31.2*2950*9380, 7*2200*8000, 30*2200*10000, 14*2400*9900, 18.5*2700*9570, 21*2100*8810, 14*2070*9060, 12*2200*10000, 14*1950*8000, 36*2200*7700, 7*2200*8000, 14*2070*9060, 10*2200*8000, 20*2500*10000, 14*2400*10000, 30*2000*7400, 6*2800*12000, 21*2100*8810, 32*2200*10000, 16*2150*10250, 27*2500*9000, 20*2100*7000, 21*2100*9100.
ASTM A633 material is particularly suited for service at low ambient temperatures and higher where notch toughness better than that expected in as-rolled material of a comparable strength level is desired. ASTM A572 ms steel coil, A633 Grade E high-strength low-alloy structural steel provides a minimum yield point of 60 ksi [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. to 6 in. [100 to 150 mm], inclusive.
According to the data released by the world iron and Steel Association, the world pig iron production in March 2020 was 103 million tons, a year-on-year decrease of 3.5%, a year-on-year increase of 1.8% in February, and the overseas pig iron ASTM A572 ms steel coil production excluding China was 36.309 million tons, a year-on-year decrease of 11%.
