For S420NL weldable fine grain structural steel plate, it is produced under specification EN 10025-3. The yield strength of S420NL plate shall be above 420Mpa for the thickness below 16 millimeter, 400MPa min. for thickness below 40mm, 390MPa min. For thickness below 63mm. The tensile strength for thickness below 100mm of this steel grade S420NL shall be within 520-680Mpa. For the Mill test certificates of steel S420NL,A588 grade B HSLA steel plate, our mill would like to issue format according to EN 10204 3.1.
Thin steel plate is a kind of steel plate material that is thinner in thickness. Generally, steel plate with thickness less than or equal to 4mm is called thin steel plate. As we all know, the steel products we usually see are also divided into different thicknesses. The strength, performance and scope of application of different thickness steel plates, A588 grade B HSLA steel plate are also different. Today, we will talk about some related knowledge of thin steel plates, and take you to understand the characteristics and uses of thin steel plates.
A588 grade B HSLA steel plate Tianjin inventory: 7*2920*8200, 15*2992*10185, 40*3050*5800, 14*1950*10700, 50*2500*12000, 20.9*2851*7000, 16*2120*6080, 20*1950*9350, 26*2200*12000, 20*2933*7300, 12.5*2900*11000, 40*3050*4200, 20*1950*9750, 15*2992*10185, 16*2230*7650, 14*2150*8500, 50*2200*12000, 16*2120*6080, 70*2500*12000.
Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as A588 grade B HSLA steel plate, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.
