The company adheres to green development, supported by scientific and technological innovation and technological progress, vigorously advocates the A514 grade T alloy steel plate production and life style of saving, environmental protection, civilization and low carbon, adheres to the new industrialization road and the sustainable development road. Actively carry out international trade and maintain stable economic and trade relations with more than 80 countries and regions including the United States, Germany, France, the United Kingdom, Japan, South Korea and Australia.
A514 grade T alloy steel plate, 40Cr material is a common machinery manufacturing steel under GB/T 3077-2015 standard. After tempering, it has good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. The hardenability of steel is good. It can be hardened to Ф28-60mm during water quenching and Ф15-40mm during oil quenching. The cutting performance is better, when the hardness is HB174 -229, the relative cutting workability is 60%.
Weather-resistant steel plate refers to steel plate that is resistant to weathering and corrosion. A514 grade T alloy steel plate, Weather-resistant steel plate can adapt well to the environment and is widely used in construction, bridges, roads and other fields with outstanding performance characteristics. One of the outstanding advantages of weather-resistant steel plate is its ability to adapt to a variety of different environments, whether it is in severe cold areas or tropical areas. The weather-resistant steel plate can better maintain its characteristics in various complex environment.
The advantage of plasma cutting is that it can cut thin plates, stainless steel and non-ferrous metals, and the cutting speed is fast. The disadvantage of plasma cutting is that the incision will have a slope, and there will be noise when cutting. The advantages of water jet cutting are wide cutting range and environmental protection, but the disadvantages of water jet cutting are slow cutting speed and high energy consumption. Do you know what is the best cutting method for A514 grade T alloy steel plate?
P235GH steel material number under EN10028-2:2003 standard is 1.0345. This steel is a European pressure vessel steel. P235GH Mechanical properties: Tensile strength σb (350 ~ 480 MPa); Yield strength σs(215 MPa min.); Elongation ≥25%; Brinell hardness ≤105 ~ 140. A514 grade T alloy steel plate, P235GH steel chemical composition (mass fraction,%): ≤0.16 C; ≤0.35 Si; 0.60 ~ 1.20 Mn; ≤0.025 P; ≤0.010 S; ≤0.30 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; ≤0.020 Al; ≤0.03 Ti.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
