CortenB vs 45#: Corten B medium-carbon quenched and tempered steel has higher strength, toughness and hardenability than 45# steel. Corten B steel can obtain better comprehensive mechanical properties after quenching and tempering. The cutting performance is still good, but the welding performance is poor, the cold deformation plasticity is low, and the temper brittleness tendency. It is generally used in quenched and tempered state, and can also be used in quenched, tempered or normalized state.
Automobile girder steel is a kind of low alloy hot-rolled steel plate with thickness of 2.5-12.0 mm for manufacturing automobile girder (longitudinal beam and cross beam). Due to the complex shape of automobile girder, good stamping performance is required in addition to high strength and cold bending performance for automobile girder steel. The ASTM A588 high strength steel, medium thick and heavy steel plates are mainly used in construction engineering, machinery manufacturing, container manufacturing, shipbuilding, bridge construction and so on.
Semi-endless rolling technology has three advantages: the ASTM A588 high strength steel product's limit thickness and limit width specification range has been significantly expanded. The thinnest thickness of SPHC steel has been expanded from 1.0 mm to 0.78 mm, and the limit specification product width has been expanded from 1100 mm to 1300 mm; The thinnest thickness of Q235B steel has been expanded from 1.2 mm to 1.0 mm, and the width range of the limit specification products has also been further expanded.
We have our own factory, including the production and manufacturing of steel pipes, with a special ASTM A588 high strength steel steel pipe manufacturer and storage warehouse. Welcome to visit our factory, we will provide customers with high quality products that meet the requirements. And has the perfect ASTM A588 high strength steel after-sale service guarantee system, lets the customer save the worry and the labor.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
