Manganese is used to deoxidize and remove sulfur in steel when making steel. It is an beneficial element in A572 grade 42 CS steel carbon plate steel. Manganese has a strong ability to deoxidize and r
A plasma cutter uses a stream of compressed gas (air, nitrogen, argon, etc.) and a consumable wire electrode as the two primary feedstocks of the steel cutting process. The electrode sends a high elec
ASTM A514 high strength steel plate, Hot rolled seamless tube is usually produced on automatic tube rolling mill. After the solid tube blank is inspected and the surface defects are removed, it is cut
Low-alloy steel plates have low carbon content, and because ferrosilicon is not used for deoxidation, the silicon content in steel is often ＜0.07%. The outer layer of rimmed steel is crystallized in a
A572 Gr 50 high strength steel, S355ML steel plate is hot-rolled weldable fine grain structural steel, which belongs to low alloy high strength steel. It is a flat rolled product with thickness less t
The main raw material of A572 grade 65 CS steel carbon plate, hot rolling coil is billet. After heating the billet, the strip made from the coarse and fine rolling mill is cooled to a certain temperat
Q550C steel belongs to low alloy high strength steel. Chemical composition of Q550C steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.030, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20,
"A283C is same as A283 Gr C, A283 grade C. A283C plate technical parameters: A283C plate chemical composition - max. 0.24% carbon, max. 0.40% silicon, max. 0.90% manganese, max. 0.035% phosphorus, max
Chemical composition for A514 Gr A alloy steel:C 0.15-0.21, Si: 0.40-0.80, Mn: 0.80-1.10, P: 0.035, S: 0.035: B: 0.0025, Cr: 0.50-0.80, Mo: 0.18-0.28, Zr: 0.05-0.15Mechanical properties for A514 Gr A
In recent years, steel structure engineering has been developing to large-scale, lightweight and high parameter, such as large-span bridges, large hydropower stations, heavy engineering machinery, etc
Hot-rolled coil is a commonly used steel product in the industry. It has a relatively wide variety of products and a wide range of uses. A514 Gr E alloy steel plate, Hot-rolled coils are widely used i
The mechanical properties of ASTM A514 steel plate are similar to that of Q690 in China. The hardness of A514 steel plate is 235-290, yield strength is more than 630Mpa and tensile strength is more th
The alloying principle of low alloy high strength steel is mainly to improve the strength of steel by solid volume strengthening, fine grain strengthening and precipitation strengthening produced by a
A514 gr K quenched and tempered alloy steel chemical composition (melting analysis)%C: 0.10-0.20, Si: 0.15-0.30, Mn: 1.10-1.50, P max.: 0.035, S max.: 0.035, Mo: 0.45-0.6.0, B: 0.001-0.005The mechanic
Carbon steel mainly refers to the steel whose mechanical properties depend on the carbon content in the A709 Gr 50 bridge steel plate steel, and generally does not add a lot of alloy elements, sometim
For low alloy high strength steel, the addition of small amounts of V, Ti, Nb, AI and other grain refining elements not only further improves the strength, but also improves the toughness of the steel
The company specializes in steel plate cutting, steel plate processing and wide thick plate, hot rolling coil. The company possesses advanced CNC steel plate cutting processing equipment, first-class
Low alloy high strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and a small amount of Nb, V, Ti, Al and other alloy elements on the basis of carbon
The weldability of A514 grade F alloy steel plate is good. It means that under certain process and construction conditions, A514 grade F alloy steel plate can obtain good performance after welding. We
Tempering the important A514 grade E structural steel material welding structure often use high temperature tempering to remove residual weld stress. Classification: high temperature tempering above 4
Our company's A514 grade R alloy steel plate power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast
A283 Gr C mild steel coil, Q690 steel is low alloy high strength steel. It belongs to the Chinese GB standard steel. Q690 steel is named after its yield strength value. Q is the abbreviation of yield