The company covers an area of 15,000 square meters and the plant construction area is 10,000 square meters. We have introduced more than 50 sets of advanced A588 grade A high strength steel production equipment, auxiliary equipment and testing equipment at home and abroad, more than 260 employees, more than 20 middle and senior management staff, more than 10 professional and technical personnel, annual production capacity of 100,000 tons. Main products: flat steel, A588 grade A high strength steel steel pipe, steel plate, section steel, steel structure processing parts, etc. We also accept incoming materials and annealing processing.
Boiler steel plates are mainly used to manufacture various boilers and important accessories. Because the boiler steel plate is working under medium temperature (below 350°C) and high pressure, in addition to high pressure, it is also subject to impact, fatigue load and water and gas corrosion. It is required to ensure a certain strength and also have good welding and cold bending performance. Common grades: Q245R, A515 Grade 55, A515 Grade 60, A588 grade A high strength steel, A516 Grade 65, A516 Grade 70.
Spring steel has good fatigue strength and can be restored to its original shape after repeated use without deformation. Because the spring has good ductility, it can be changed back to its original state no matter how long it is stretched. Spring steel has good elasticity. In addition to being made into springs, spring steel can also be processed into swords, which requires good elasticity also. A588 grade A high strength steel, Spring steel has good tensile strength and can be restored without breaking under the limit of being stretched.
Advantages of hot rolling: hot rolling can destroy the casting structure of ingot, refine the grain of steel and eliminate the defects of microstructure, so that the steel structure is dense and the mechanical properties are improved. This improvement is mainly reflected in the rolling direction, so that the A588 grade A high strength steel steel is no longer isotropic to some extent; the bubbles, cracks and looseness formed during pouring can also be welded under the action of high temperature and pressure.
A588 grade A high strength steel, Grade P295GH chemical composition under EN10028-2:2003 is displayed as follows. Chemical composition (C: 0.08 to 0.20; Cr: ≤0.30; Si: ≤0.40; Cu: ≤0.30;Mn: 0.90 to 1.50; Mo: ≤0.08;P: ≤0.025; Nb: ≤0.020;S: ≤0.015; Ni: ≤0.30;Al: ≤0.020; Ti: 0.03; N: ≤0.012; Vi: ≤0.02). The yield Strength MPa (min) of P295GH steel plate with thickness less than 16mm is 295MPa, and the tensile strength is 460-580MPa.
The company is deeply supported and loved by customers with its unique business philosophy and business model. The company has always been adhering to the "credibility first, integrity-based, quality first" purpose, and sincerely serve new and old customers. Over the past twenty years, the company has won the trust of customers by relying on good service and good reputation. Our aftersales team’s main responsibility is to deal with quality feedback and complaints from Customer.
