A514 gr.E quenched and tempered alloy steel chemical composition (melting analysis)%C: 0.12-0.20, Si: 0.20-0.40, Mn: 0.40-0.70, P max.: 0.035, S max.: 0.035, Cr: 1.40-2.00, Mo: 0.40-0.60, Ti: 0.01-0.10, Cu: 0.15-0.50, B: 0.001-0.005The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18
A514 Gr E alloy steel plate hot rolled products 2020 online stock: 16*2200*8000, 16*2000*10713, 20*2100*11600, 20*2150*10000, 25*1950*10150, 25*1950*9700, 30*2010*9500, 15*2500*10000, 50*2450*4800, 28*2170*13000, 60*2600*12150, 25*2400*8200, 40*2950*7100, 70*2270*7350, 70*2270*7600, 70*2500*12000, 75*2390*4320, 80*2200*10000, 88*3440*9200, 100*1770*6650.
Composition characteristics of A514 Gr E alloy steel plate product: (1) Low carbon: Due to high requirements for toughness, weldability and cold formability, its carbon content does not exceed 0.20%. 2) Add manganese-based alloying elements. 3) Adding auxiliary elements such as niobium, titanium or vanadium: a small amount of niobium, titanium or vanadium forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of the steel.
The data shows that Southeast Asia is the main A514 Gr E alloy steel plate and so on steel export region of China, and the steel export volume of Asia in 2019 is 37.198 million tons; that of North America and South America is 4.0678 million tons, and that of Europe is 1.1358 million tons. According to the latest epidemic data, South Korea and Japan are the most affected countries in Southeast Asia. However, the growth rate of the number of confirmed cases slowed down significantly, while the situation of the epidemic in Italy, a major European steel export country, was still severe, with the number of confirmed cases exceeding 53000. Therefore, the recovery speed of European market is slower than that of Southeast Asia.
