Strip steel is mainly used for the manufacture of welded pipes, clamps, washers, spring blades, saw blades, blades and other fields, so the A588 grade C structural steel plate, strip steel specifications are also relatively standardized. First, the strip width should be within 1300mm, if it is too wide, it will become a steel plate, and the machining is not allowed to be too wide, otherwise it will fail. Second, the strip steel length is not limited, and the strip steel can be coiled together after bending, reducing most of the space.
Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as A588 grade C structural steel plate, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.
The weldability of A588 grade C structural steel plate is good. It means that under certain process and construction conditions, A588 grade C structural steel plate can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.
