The company has superior geographical location and convenient transportation. After more than 20 years of market trials and tribulations, from small to large, from weak to strong, in order to meet the needs of customer extension development, the company expanded the deep A514 grade M alloy steel plate processing services of cutting steel pieces. Now we have built a business system integrating steel plate, steel plate cutting and A514 grade M alloy steel plate steel deep processing. The company provides one-stop solution for customers with lower price, higher quality and faster response speed.
ASME SA203 is a low-nickel alloy steel, including five grades of A, B, D, E, and F. SA203 Gr.E steel plate impact temperature -101 ° C. SA203 Gr.D / E / F has good impact toughness and mechanical properties under low temperature working conditions, and is usually used in low temperature environments of -70 ～ -101 ℃ (the tempered state can be -107 ℃). A514 grade M alloy steel plate Smelting method: It is smelted by electric furnace + refining outside the furnace + vacuum degassing, and should be fine grain killed steel.
A514 grade M alloy steel plate, low alloy high strength steel has good atmospheric corrosion resistance and is widely used in engineering structure construction. Most of the engineering structures are used in the atmosphere or marine environment. A small amount of Cu, Ni, Cr, P and other elements are added to the low alloy high strength steel, which effectively improves the corrosion resistance of the engineering structure in the atmosphere, sea water and soil. If 0.2% - 0.5% copper, 0.05% - 0.1% phosphorus and aluminum are added, the corrosion resistance of steel can be improved obviously, and the effect of adding copper and phosphorus at the same time is the best.
Most common A514 grade M alloy steel plate steel plates are rolled by hot rolling or controlled rolling. Compared with the general hot rolling process, the advantages of controlled rolling are: the strength and low temperature toughness of steel plates are greatly improved by controlled rolling to refine grains. In addition, the controlled rolling process can give full play to the role of Microalloying Elements Nb, V and Ti, not only play a role of precipitation strengthening, but also refine the grains, and improve the toughness of the rolled A514 grade M alloy steel plate steel plates.
A514 grade M alloy steel plate, Grade P295GH chemical composition under EN10028-2:2003 is displayed as follows. Chemical composition (C: 0.08 to 0.20; Cr: ≤0.30; Si: ≤0.40; Cu: ≤0.30;Mn: 0.90 to 1.50; Mo: ≤0.08;P: ≤0.025; Nb: ≤0.020;S: ≤0.015; Ni: ≤0.30;Al: ≤0.020; Ti: 0.03; N: ≤0.012; Vi: ≤0.02). The yield Strength MPa (min) of P295GH steel plate with thickness less than 16mm is 295MPa, and the tensile strength is 460-580MPa.
We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide A514 grade M alloy steel plate reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.
