A514 grade P quenched and tempered steel,The company covers an area of 15,000 square meters and the plant construction area is 10,000 square meters. We have introduced more than 50 sets of advanced production equipment, auxiliary equipment and testing equipment at home and abroad, more than 260 employees, more than 20 middle and senior management staff, more than 10 professional and technical personnel, annual production capacity of 100,000 tons. Main products: flat steel, steel pipe, steel plate, section steel, steel structure processing parts, etc. We also accept incoming materials and annealing processing.
Our steel pipes include four major types which are seamless pipe, ERW pipe, LSAW pipe, SSAW pipe, . Seamless pipe supply scope is OD 10.3mm--965.2mm, wall thickness 1.0mm--60mm. The ERW pipes production range from OD 21.3mm--660mm, wall thickness 1.0mm--16mm. LSAW pipes can supply with OD 406mm--1524mm, wall thickness 6mm--50mm. SSAW pipes can produce maximum OD 3500mm, minimum OD 219.1mm, wall thickness 3.2--25.4mm.
The company attaches great importance to logistics services, sets up our own transport truck fleet, improves customer response capacity through the improvement of logistics capacity, and further reduces costs. Customers ordering steel from our company can not only enjoy the service of fast delivery, but also enjoy lower transportation costs. Fast, accurate, simple and efficient has always been our principle.
Laser cutting has no burr, wrinkle and precision is high. It is superior to plasma cutting. Laser cutting has good cutting quality, narrow cutting width (generally 0.1-0.5m m), high accuracy (generally 0.1-0.4mm hole center distance error, 0.1-0.5mm contour dimension error), good surface roughness (generally Ra is 12.5-25μm), and the cutting seam can be welded without further processing. Fast cutting speed: for example, with 2kW laser power, the cutting speed of 8mm thick carbon steel is 1.6m/min.
The final heat treatment of quenched and tempered alloy steel is quenching and high temperature tempering. The hardenability of quenched and tempered alloy steel is high, and oil is generally used. When the hardenability is very high, it can even be air cooled, which can reduce the defects of heat treatment. The final properties of quenched and tempered alloy steel depend on tempering temperature. Generally, it is tempered at 500 ℃ - 650 ℃. The required properties can be obtained by selecting tempering temperature. In order to prevent the second kind of temper brittleness, fast cooling (water cooling or oil cooling) after tempering is beneficial to the improvement of toughness.
A514 grade P quenched and tempered steel,After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.
Judging from the data of the Brazilian automotive industry, in 2020, Brazil's steel plate demand may increase due to the pull of the automotive industry. The Brazilian Steel Dealers Association predicts that, with the support of increased output of automobiles and increased output of agricultural equipment, by 2020, the sales of Brazilian steel plate materials will increase by about 4.0%. We are leading steel plates supplier in the world and have many projects in South America.A514 grade P quenched and tempered steel
