Strengthen system construction. The system itself has a certain binding force, which specifies the rights and obligations of employees. It is a passive management means for employees. Its purpose is to promote each employee to develop good professional habits, form good behavior norms, and promote the improvement of enterprise management level.
Chemical composition of A514 grade Q quenched and tempered steel, Q345D steel plate: C: ≤0.18; Si: ≤0.50; Mn: ≤1.70; P: ≤0.030; S: ≤0.025; Nb: ≤0.07; V: ≤0.15; Ti: ≤0.20; Cr: ≤0.30; Ni: ≤0.50; Cu: ≤0.30; N: ≤0.012; Mo: ≤0.10; Als: ≥0.015. Yield strength (MPa) of Q345D steel plate: ≤16mm: ≥345; 16-40mm: ≥335; 40-63mm: ≥325; 63-80mm: ≥315; 80-100mm: ≥305; 100-150mm: ≥285; 150-200mm: ≥275; 200-250: ≥275; 250-400: ≥265. Tensile strength of Q345D low alloy steel: 450-630(MPa). Elongation: ≥21. Impact test: -20 ℃: ≥34.
In order to obtain the seamless tube with smaller size and better quality, the method of cold rolling, cold drawing or the combination of the two must be used. Cold rolling is usually carried out on a two high mill, and A514 grade Q quenched and tempered steel pipes are rolled in a circular pass composed of a variable cross-section circular groove and a fixed conical head. Cold drawing is usually carried out on single chain or double chain cold drawing machines of 0.5-100t.
Jspl announced plans to build a 2.5-million-ton-a-year A514 grade Q quenched and tempered steel steel plant in the ramga region of the Indian state of Jharkhand. It is reported that the company has a wire mill, a bar mill and a steel service center in the region. The new steel plant is expected to be put into operation in two to three years. The completion of the new A514 grade Q quenched and tempered steel steel plant will be conducive to its integration and elimination of backward production capacity.
Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;
In the first quarter, A514 grade Q quenched and tempered steel, crude steel output in Asia amounted to 315.15 million mt, falling by 0.3 percent, with 234.45 million mt produced by China, up 1.2 percent, 24.36 million mt produced by Japan, decreasing by 2.4 percent, 27.5 million mt produced by India, falling by 5.3 percent, and 16.94 million mt produced by South Korea, down by 4.8 percent - with all comparisons on year-on-year basis.
