BEBON cpompany practice new development concepts, expand in an all-round way, deepen reform and innovation, speed up transformation and upgrading, become stronger, better and bigger, accelerate the implementation of BEBON Steel's industrial planning, and realize the revitalization and development of enterprisesFully implement the corporate market dominant position, comprehensively promote contractual management, and promote the transition from "internal production" to "market operation”,ASTM A514 structural steel.
ASTM A514 structural steel,ASTM A514 steel is mainly used in places where high tensile strength and high yield are required, such as engineering vehicle lifting gears, large excavators, offshore platforms, etc. Different grades of A514 steel plate have different thickness, chemical composition and properties. However, the mechanical properties specified in ASTM A514 are similar to those of Q690 in China. A514 grade Q is generally used as the rack for offshore platform. Its hardness is between 230-390MPa, yield is greater than 630MPa, and tensile strength is more than 700MPa.
The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.ASTM A514 structural steel
The preparation of galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for centralized control, two-layer welding process, reducing the possibility of incomplete penetration.
Special thick steel plate cutting needs to be preheated in advance. Some steel plates are prone to cracks after entering the cutting process, sometimes that is because the temperature is too low, and it is necessary to perform pre-heat treatment in advance for such cases. The staff can preheat the steel plates first, so that the temperature of the steel plates will gradually increase, and then the flame gun can be used to cut. The probability of cracks in the cut material is very low, and the quality of the steel plate is also guaranteed.
The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.
In the first quarter, crude steel output in Asia amounted to 315.15 million mt, falling by 0.3 percent, with 234.45 million mt produced by China, up 1.2 percent, 24.36 million mt produced by Japan, decreasing by 2.4 percent, 27.5 million mt produced by India, falling by 5.3 percent, and 16.94 million mt produced by South Korea, down by 4.8 percent - with all comparisons on year-on-year basis.
