The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should have different quality requirements. In terms of the mechanical properties of steel such as ASTM A514 high strength steel plate, yield point, tensile strength, elongation, cold bending property, impact toughness etc. are the indicators to measure the quality of steel. In the design of steel structure, the appropriate steel should be selected according to the characteristics of the structure. The selection of steel is not only an economic problem, but also related to the safety and service life of the structure.
ASTM A633 material is particularly suited for service at low ambient temperatures and higher where notch toughness better than that expected in as-rolled material of a comparable strength level is desired. ASTM A514 high strength steel plate, A633 Grade E high-strength low-alloy structural steel provides a minimum yield point of 60 ksi [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. to 6 in. [100 to 150 mm], inclusive.
The company has superior geographical location and convenient transportation. After more than 20 years of market trials and tribulations, from small to large, from weak to strong, in order to meet the needs of customer extension development, the company expanded the deep ASTM A514 high strength steel plate processing services of cutting steel pieces. Now we have built a business system integrating steel plate, steel plate cutting and ASTM A514 high strength steel plate steel deep processing. The company provides one-stop solution for customers with lower price, higher quality and faster response speed.
The main function of boron in ASTM A514 high strength steel plate and so on steel is to increase the hardenability of steel, so as to save other rare and precious metals, such as nickel, chromium and molybdenum. For this purpose, the boron content is generally regulated in the range of 0.001% - 0.005%. It can replace 1.6% nickel, 0.3% chromium or 0.2% molybdenum. It should be noted that molybdenum can prevent or reduce temper brittleness, while boron slightly promotes temper brittleness, so molybdenum can not be completely replaced by boron.
