The purpose of alloying Q345B steel is to use the interaction of alloy elements with iron and carbon and the effect on iron-carbon phase diagram and the heat treatment of steel to improve the structure and properties of steel. Interaction of alloying elements with iron and carbon: After alloying elements are added to steel, they mainly exist in steel in three forms. That is: forming a solid solution with iron; forming carbides with carbon; and possibly forming intermetallic compounds in high alloy steels, A283 Gr C carbon steel sheet.
In February, the North American steel price index was 171.2 points, up 4.6 points on a month on month basis, up 2.8%; the U.S. manufacturing PMI was 50.1%, down 0.8 percentage points on a month on month basis. Among them, the production index decreased by 4.0 percentage points, and the inventory index decreased by 2.3 percentage points; at the end of February, the utilization rate of crude steel production capacity in the United States was 82.5%, 0.2 percentage points higher than that in the previous month. This month, the ex factory prices of major steel products such as A283 gr C carbon steel sheet in the Midwest steel works of the United States rebounded. Except for the steel prices remained stable, the prices of other steel products rose.
Heavy plate A283 gr C carbon steel sheet spot in Shanghai warehouse 65*2250*4600, 110*2600*10600, 100*2600*10300, 130*2600*9350, 100*2600*11830, 140*2600*8550, 70*3020*8100, 58*2600*3300, 120*2600*9800, 100*2600*11700, 120*2600*9800, 68*2065*4500, 130*2500*9000, 180*2600*6800, 180*2600*6750, 92*3020*9600, 150*2500*7500, 100*2600*11800, 180*2600*6780, 200*2600*6130, 200*2600*5980, 200*2600*6000, 200*2600*6150.
In the preparation of groove, the groove preparation of A283 gr C carbon steel sheet thick plate should be processed by mechanical groove machine first, so as to avoid flame cutting, so as not to lead to repeated heat in the welding part.Reasonable groove Angle is established to reduce the groove size as far as possible while meeting the weld connection strength, so as to achieve the purpose of reducing the amount of weld deposited metal filling.In the groove machining process, the deviation of groove Angle and blunt edge dimension should be restricted strictly according to the established requirements.
