The company has allocated special environmental protection facilities for all A283 grade D mild steel coil pollution sources, strengthened the recycling of waste resources and improved the efficiency of resource utilization. At present, the recovery and utilization rate of solid wastes such as iron slag, steel slag, iron bearing dust, A283 grade D mild steel coil steel mill scale, environmental protection dust has reached 100%.
Carbon steel A283 grade D mild steel coil is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the A283 grade D mild steel coil content of sulfur and phosphorus, the better the quality of carbon steel.
The yield point of the steel structure determines the stress that the structure can withstand without permanent deformation. The minimum yield point of typical carbon structural steel is 235MPa. The minimum yield point of typical low-alloy high-strength steel is 345MPa. Therefore, according to the proportional relationship of its yield point, the use of low-alloy high-strength steel allows the stress to be 1.4 times higher than that of carbon structural steel. Compared with A283 grade D mild steel coil, carbon structural steel, the use of low-alloy high-strength steel can reduce the size of structural parts and reduce weight.
If the chromium content in A283 grade D mild steel coil alloy steel reaches about 12%, dense chromium oxides will be formed on the surface of the steel, which will greatly improve the corrosion resistance of steel in oxidizing media. Chromium, aluminum, silicon and other elements can improve the oxidation resistance of steel and the corrosion resistance of high-temperature gas, but excessive aluminum and silicon will deteriorate the thermoplasticity of steel.
Q355B steel and A283 grade D mild steel coil steel Both Q345B and Q355B are low alloy steels. The difference is that the yield strength of Q345B low alloy steel and Q345B low alloy steel is different. In Q345B low-alloy steel, q represents the yield strength of this material, and the latter 345 represents the yield value of this material is around 345mpa. Q in Q355B low-alloy steel also represents the yield strength of this material, and the latter 355 indicates that the yield value of this material is around 355mpa.
There is a careful, patient, enthusiastic and thoughtful after-sales team, a professional distribution, ultra-efficient warehouse and logistics center, a marketing team with marketing expertise, an innovative technology center with strong steel technology, an experienced manufacturing center with rigorous professionalism Quality Inspection Center, an operation team with many years of administrative management experience. Such a strong combination of teams makes BEBON a steel giant in Henan Province.