The fake and inferior A572 Gr 55 CS steel carbon plate, steel plates have no metallic luster and are light red or similar to pig iron for two reasons. 1. Its blank is adobe. 2. The rolling temperature of counterfeit and inferior materials is not standard, and their steel temperature is visually inspected. In this way, rolling cannot be carried out in the specified austenite area, and the performance of the steel plate will naturally not meet the standard.
Myanmar's demand for A572 Gr 55 CS steel carbon plate steel products is likely to exceed 3 million tons in 2020 and 5 million tons by 2025, according to seaisi. However, Myanmar's producers are unable to meet domestic demand, so the country's steel products are more dependent on imports. In 2019, Myanmar imported more than 1.9 million tons of A572 Gr 55 CS steel carbon plate finished steel, including 57% of long products, 13% of uncoated hot-rolled and cold-rolled flat products, and 30% of coated steel. In order to reduce its dependence on imports, Myanmar plans to increase its steel production capacity by building and expanding steel mills.
The weldability of A572 Gr 55 CS steel carbon plate is good. It means that under certain process and construction conditions, A572 Gr 55 CS steel carbon plate can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.