Smelting process of A588 grade A structural steel plate, container plate SPA-H weather-resistant steel: The molten iron for smelting SPA-H steel must be pretreated by molten iron desulfurization. Before entering the converter, the sulfur content of the molten iron is ≤0.010%, and the slag on the surface of the molten iron is cleaned. Nickel plates, copper particles or nickel-copper alloys are added to the converter with scrap steel. The carbon content of the converter smelting end is required to be less than 0.06% to prevent the molten steel from being oxidized.
The quality grade symbols of Q235 steel plate are A, B, C and D respectively. Different grades represent different impact temperatures. A588 grade A structural steel plate, Q235A is not required for impact toughness test; Q235B is required for impact toughness test at room temperature (20 ℃); Q235C is required for impact toughness test at 0 ℃; Q235D is required for impact toughness test at - 20 ℃. For the above-mentioned B, C and D grade steels, Akv ≥27J is required under different temperature requirements. At different impact temperature, the impact value is also different.
After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.
